1600w/2000w 235v carbon fiber ir heat lamp for textile dryer

Sun, 26 Jul 2026 00:33:27 +0800

Getting Your Textile Drying Right with Carbon Fiber IR Lamps

If you’re running a high-volume textile line, you know the struggle. You need the fabric dry or the dyes cured, but you can’t risk scorching the material. That’s why we built these carbon fiber infrared lamps. They hit that sweet spot of intense, concentrated heat that gets the job done without ruining the fabric. Choosing your power We offer these in 1600W and 2000W, both running at 235V. Which one should you pick? It really comes down to how fast your conveyor is moving and how thick your fabric is. If you’re dealing with heavy GSM materials or you need to crank up the line speed, go with the 2000W. It puts out more heat, plain and simple. One quick heads-up: these are spec’d for 235V to fit specific industrial grids. Just make sure your voltage regulators are dialed in. If your power jumps around too much, you’ll fry the filament, and nobody wants to deal with that mid-shift. Why carbon fiber? Most people are used to those old quartz halogen lamps. But we went with carbon fiber for a reason. Carbon fiber handles the “on-off” cycle way better. It doesn’t snap or crack when the temperature swings, so they last longer. Plus, the medium-to-long wave IR actually sinks deeper into the fibers rather than just hitting the surface. We wrap the whole thing in a quartz envelope to keep the element safe and make sure the heat actually hits the fabric. Fitting them into your setup The good news is these are basically drop-in replacements for most standard dryer banks. You can get them wired up and running pretty quickly. But keep an eye on your airflow. The 2000W version puts out a lot of heat, and that heat can soak back into the housing. If the ends of the tube don’t have room to breathe, your seals will degrade faster than they should. And here’s a pro tip: if you’re running a long row of these, don’t flip the switch on all of them at once. Stagger the firing sequence. It stops that massive power spike at startup and keeps your carbon filaments healthy for the long haul.

235v on Warm Lamp Tech

1600w/2000w 235v carbon fiber ir heat lamp for textile dryer

Getting Your Textile Drying Right with Carbon Fiber IR Lamps